| 您现在的位置：金属切削中心 >> 产品导航 >> DORMER品牌板牙产品一览 |
| □DORMER板牙-英国DORMER品牌板牙(隶属于山特维克SANDVIK) |
|
板牙 Dies are used for external threading. Manual threading is the most usual method although machine threading is sometimes used for simple tasks. A solid die usually cuts more accurately than a split die. However, dies which are supplied solid may be split |
|||
| General Hints on the use of Dies and Dienuts | |||
 |
Before starting the Die or Dienut, chamfer the end of the bar at an angle of 45 degrees to eliminate sudden loading of the leading edges. Ensure the Die or Dienut is presented to the bolt squarely. | ||
 |
Make use of the large tolerances associated with the Major Diameter of the bolt, by reducing the diameter of the bar (see chart). This will reduce the cutting force to a minimum. | ||
 |
Use the Gun Nose type of die, type F100 or similar, as this ensures the swarf is directed away from the cutting area. | ||
 |
Ensure a good supply of the correct lubricant is aimed at the cutting area. | ||
 |
When adjusting split Dies, avoid opening out as this will cause rubbing. Split dies may be closed down by approxi-mately 0.15mm, by turning the adjustment screws equally. Pressure on one side of the Die only may cause breakage. | ||
 |
Generally speaking, Dienuts are used for reclaiming or cleaning out existing threads by hand. They tend to be of a more robust construction and should only be used in exceptional circumstances to cut a thread from solid. | ||
| 螺纹类型 | 注 | 板牙样式 | |
| F500 | M | 碳钢(CS)材质 | 普通板牙 |
| F100 | M | 高速钢(HSS)材质 | |
| F201 | M | 高速钢(HSS)材质,左旋螺纹 | |
| F108 | M | 钴高速钢(HSCo)材质 | |
| F110 | MF | 高速钢(HSS)材质 | |
| F120 | UNC | 高速钢(HSS)材质 | |
| F130 | UNF | 高速钢(HSS)材质 | |
| F140 | BSW | 高速钢(HSS)材质 | |
| F150 | BSF | 高速钢(HSS)材质 | |
| F170 | G | 高速钢(HSS)材质 | |
| F180 | NPT | 高速钢(HSS)材质 | |
| F190 | PG | 高速钢(HSS)材质 | |
| F300 | M | 高速钢(HSS)材质 | 可调板牙 |
| F301 | M | 高速钢(HSS)材质,左旋螺纹 | |
| F310 | MF | 高速钢(HSS)材质 | |
| F320 | UNC | 高速钢(HSS)材质 | |
| F330 | UNF | 高速钢(HSS)材质 | |
| F340 | BSW | 高速钢(HSS)材质 | |
| F350 | BSF | 高速钢(HSS)材质 | |
| F360 | BA | 高速钢(HSS)材质 | |
| F370 | G | 高速钢(HSS)材质 | |
| F380 | Rc | 高速钢(HSS)材质 | |
| F202 | M | 高速钢(HSS)材质,DIN标准 | |
| F302 | M | 高速钢(HSS)材质,BS标准 | |
| F312 | MF | 高速钢(HSS)材质 | |
| F272 | G | 高速钢(HSS)材质 | |